WA Plastics
46 Mordaunt Circuit, Canning Vale WA 6155
e: sales@waplastics.com.au

(08) 9256 2011

Products > Engineering > Nylon

Nylon Ertalon 6SA
This material offers an optimal combination of mechanical strength, stiffness, toughness, mechanical damping properties and wear resistance. These properties, together with a favourable electrical insulating ability, and a good chemical resistance make Ertalon 6SA a "general purpose" grade for mechanical construction and maintenance.

Sheet Thicknesses: 1 - 100mm
Sheet Sizes: 2000*1000
Nylon Rod Outside Diameter:
10 - 150mm
Nylon Tube Outside Diameter:
20 - 200mm

High Mechanical Strength
Good Fatigue Resistance
High Mechanical Damping Ability
Good Sliding Properties
Excellent Wear Resistance

Ertalon is used for a wide range of industrial components both for Original Equipment Manufacture and maintenance.

  • Sleeve And Slide Bearings
  • Wear Pads
  • Support & Guide Wheels
  • Conveyor Rollers
  • Sleeves for Wheels & Rollers
  • Pulleys & Pulley Linings
  • Cams
  • Buffer BlockHammer Heads
  • Scrapers
  • Gear Wheels
  • Sprockets
  • Seal-rings
  • Feed Screws
  • Starwheels
  • Cutting & Chopping Boards
  • insulators

Specific Gravity

g/cm3 1.14
Continuous Operating Temperature °C - 5,000Hrs / 20,000Hrs 85/70
Tensile Strength MPa 76
Impact Resistance Charpy KJ/m2 no break
Impact Resistance Izod KJ/m2 5.5
Hardness Rockwell M    85
Co-efficient of Thermal Expansion mm/(mmxK) x 10-6
avg value 23-60°C
Dielectric Strength KV/mm 25
Surface Resistivity Ohms 1x1013
FlammabilityOxygen Index % 25
Flammability UL94 HB

Disclaimer: WA Plastics has provided the details in this Data sheet in good faith and it should only be used as a general guide. For further information please contact WA Plastics direct.