WA Plastics
Search
46 Mordaunt Circuit, Canning Vale WA 6155
e: sales@waplastics.com.au

(08) 9256 2011

Products > Engineering > Polyethylene > HDPE

HDPE SHEET (High Density Polyethylene)
More Polyethylene is used today than any other Thermoplastic. Many different grades of material are available but HDPE is a more rigid and harder grade than Low density materials. With improved tensile strength and considerably better compressive strength this material is used in diverse areas from Bridge building to the food container industry.

Colours: Natural (white), Black , Safety Yellow
Thicknesses: 1, 1.5, 2, 3, 4.5, 6, 10, 12, 15, 20, 25, 30 and 40mm
Sheet Sizes: 2000*1000     3000*1500     4000*2000

 

Features:
Weatherproof
Chemical Resistance
Weldable
Can be Fabricated
Electrical insulation
Light weight

 

 

Applications: 
Tank Manufacturing
Storage Vessels
Cutting Board
Containers
Guards

 

 PE Physical Properties

Specific Gravity

DIN 53479 Units g/cm3 0.945

Minimum / Maximum Service temperature in Air

Unit oC -50
+80
Tensile Strength Yield MPA 23
Tensile Strength Break MPA 32
Hardness Shore D 63
Co-efficient of Thermal Expansion Units mm/(mmxK) x 10-6 200
Dielectric Strength DIN 53481 Units KV/mm
(meas. on a 0.2mm thick sheet)
75
Surface Resistivity Units Ohms >1x1015

Disclaimer: WA Plastics has provided the details in this Data sheet in good faith and it should only be used as a general guide. For further information please contact WA Plastics direct.